Archive | Tools

चिह्नित करने के लिए प्रयुक्त उपकरण की सूची | List of Tools Used for Marking | Hindi | Industrial Engineering

चिह्नित करने के लिए प्रयुक्त उपकरण की सूची | List of Tools Used for Marking in Hindi चिह्नित करने के लिए प्रयुक्त उपकरण की सूची |. 1. स्क्राइबर (Scriber): स्क्राइबर एक तेज धार वाला औजार है जिसका प्रयोग मार्किंग करते समय लाइनें खींचने के लिए किया जाता है । इनके प्वाइंट को 12० से 15० के कोण में ग्राइडिग किया [...]

By |2018-09-29T12:25:13+05:30May 16, 2018|Tools|Comments Off on चिह्नित करने के लिए प्रयुक्त उपकरण की सूची | List of Tools Used for Marking | Hindi | Industrial Engineering

Tools Used for Shaping Metals | Hindi | Industrial Engineering

Read this article in Hindi to learn about the four important tools used for shaping metals. The tools are:- 1. फोर्ज (Forge) 2. एन्विल (Anvil) 3. टोंग्स (Tongs) 4. हैमर (Hammer). Tool # 1. फोर्ज (Forge): यह एक प्रकार की भट्ठी होती है जिसमें जॉब को रखकर गर्म किया जाता है । मुख्यत: फोर्ज निम्नलिखित दो प्रकार की होती है: [...]

By |2018-05-16T07:42:08+05:30May 16, 2018|Tools|Comments Off on Tools Used for Shaping Metals | Hindi | Industrial Engineering

Vernier Height Gauge: Principle and Types | Hindi | Industrial Engineering

Read this article in Hindi to learn about:- 1. वर्नियर हाइट गेज के सिद्धांत (Principles of Vernier Height Gauge) 2. वर्नियर हाइट गेज के प्रकार (Types of Vernier Height Gauge) 3. मार्किंग करने की विधि (Method of Marking) 4. सावधानियां (Precautions). वर्नियर हाइट गेज के सिद्धांत (Principles of Vernier Height Gauge): वर्नियर हाइट गेज दो अनुरूप स्केलों के अल्पतमांक के [...]

By |2018-05-16T07:42:07+05:30May 16, 2018|Tools|Comments Off on Vernier Height Gauge: Principle and Types | Hindi | Industrial Engineering

Vernier Bevel Protractor: Construction & Reading | Hindi | Industries

Read this article in Hindi to learn about:- 1. वर्नियर बेवल प्रोट्रैक्टर  का बनावट (Construction of Vernier Bevel Protractor) 2. वर्नियर बेवल प्रोट्रैक्टर मे रीडिंग लेना (Method of Reading Vernier Bevel Protractor) 3. सावधानियां (Precautions). वर्नियर बेवल प्रोट्रैक्टर  का बनावट (Construction of Vernier Bevel Protractor): बनावट इसकी बनावट में निम्नलिखित पार्टस होते हैं: 1. स्टॉक या 2. ब्लेड 3. डायल [...]

By |2018-05-16T07:42:07+05:30May 16, 2018|Tools|Comments Off on Vernier Bevel Protractor: Construction & Reading | Hindi | Industries

Dial Bore Gauge and Its Reading | Hindi | Industrial Engineering

Read this article in Hindi to learn about the dial bore gauge and its reading. रीडिंग लेने के लिए पहले माप लेने वाली रेंज और स्केल पर सब-डिवीजनों को चैक करें । बेसिक माप 40 मि.मी. है और डायल पर दोनों और 0 से 40 ग्रेजुएशनें बनी हैं । प्रत्येक डिवीजन का मान 0.01 मि.मी. है । बेसिक माप 40 [...]

By |2018-05-16T07:42:06+05:30May 16, 2018|Tools|Comments Off on Dial Bore Gauge and Its Reading | Hindi | Industrial Engineering
Go to Top